November 2016 - Bloggerdroidseo Where bloggers relate to learn blogging tips and tricks Bloggerdroidseo Where bloggers relate to learn blogging tips and tricks : November 2016


Featured Featured
BETTER SEO: Finding keywords for your website
Sharing of Apk Files on Whatsapp Made Easier
9mobile Special Data, Get 1GB Data for N200 and 5GB for N1000
New Method To Activate MTN 100% Double Data Bonus Via IMEI Tweaking

Monday, 21 November 2016


There are several SEO hacks SEO newbies can perform on their blogs. One of such is to eliminate website flaws. As you may have known, SEO means search engine optimization. Which entails the thing you need to do to make your website or blog rank high and easily accessible via search engines like Google, Bing, Yahoo etc. In this article, you will find a simple SEO hack you should perform to increase your search traffic.

eliminate website flaws

The website flaws you should eliminate is those things on your blog that could put people off when they arrive at your website. The most important ones are the things that cause your blog pages to load slowly. This means you need to eliminate your paged load times. The first problem that visitors would notice is a slow page load time. You would want to keep your page load times to a minimum of 3 to 5 seconds.

The first thing you will want to do now is to analyze your site’s speed. You can use GTmetrix, a tool that gives you insight on how well your site loads and provides actionable recommendations on how to optimize it.

While writing this post, I did an analysis of The Money Blog‘s home page (i.e. and got the result shown below.

speed test

As you can see from the result, PageSpeed Score is 94%, Slow Score is 80% and Page Load Time is 4.6s. This is not the best result but it works well for visitors who comes to this blog from search engines via desktop and mobile devices. If you can decrease your page load times from what it is to about 2-seconds page load, you are sure to have a whopping 30-50 percent increase in search traffic conversions.

How Do You Reduce Page Load Times?

The first step to take is to see the recommendations provided on the GTMetix result page. You are to do one after the other in order to reduce your website/blog load times. The recommended steps are in different categories. Please note, not every recommendation will apply to your page. The recommendations are meant to be best practices. However, some of the solutions will be out of your control or may not apply to your page. So, you need to know exactly what you are doing.

There are other things you need to do to eliminate website flaws. In the mean time, go and work on your page load times with the recommended optimization techniques. If you need help, feel free to contact us and we would be glad to assist you.

Thursday, 17 November 2016


Ads can be placed anywhere inside a blog post. You can easily garner users’ attention by placing ads at the right location. There are no hard and fast rules to choose a right location to place the ads. You just need to think from the point of blog visitors’ view and decide on a location. Moreover, layout and theme of your blog can also help you to decide where to place ads. If you run a blog that is related to science and technology, then it is better to place ads at the sides, as that would not distract users’ attention. Whereas if you run a blog to promote a product, then you can place ads anywhere inside a blog post.
Google’s blogger has built-in feature to place ads between multiple posts. Here are the steps to place ads between blog posts.
1. Log in to your blogger account. Go to “Template” and then “Page Elements”. Inside the “Page Elements” you can see the heading “Blog Post” with an edit link. Click on the edit link.
2. In the edit page, you can see few checkboxes. Check on the “Show Ads between posts.” By enabling this checkbox, you are allowing Google to place ads between posts.
3. Next, click on “Show after every post” dropdown menu. This dropdown menu allows you to specify whether you want an ad to appear after every post or after multiple posts. If you want ads to be placed after every 2 posts, then select 2 from the drop down menu.
4. Next, you can see the format and color options. These options allow you to choose the format and the background color of the ads.
5. Save the changes and refresh your blog to see the ads placed between your blog posts.
These steps are simple and can be easily followed even by a novice blogger. The limitation with this method is you cannot place ads between a post title and a post body. You can easily garner users’ attention by placing ads between a post title and a post body.
The first step is to get the code that displays the ads. The following steps show how to get AdSense code for Google AdSense.
1. Get the AdSense Code: Log in to your Google AdSense account. Go to “AdSense Setup” and select “Products”. Here you can see various options. Select the “AdSense for Content” and click on “Ad Unit.” Then follow the instructions until the website generates an AdSense code. Copy this AdSense code and paste it in a notepad.
2. Parse the AdSense code: The generated AdSense code has less than, greater than, and quote symbols which you need to replace as per HTML standards. Here are the steps to replace the symbols with valid HTML code. Replace a less than symbol with an ampersand followed by “lt” and a semicolon. In the same way replace a greater than symbol with an ampersand followed by “gt” and a semicolon. Make use of the notepad “Search and Replace All” feature to replace all such symbols with their respective HTML code. After you parse the code, it is ready to be placed in the blog template.
3. Back up your blog template: Before you start to edit the blog template, it is better to backup the blog template, incase if anything goes wrong.
4. To place ads between post title and post body: Open the blog template and search for “post-body”. Next, place the AdSense code above the div-class=’post-body’. Now the ads will appear between a post title and post body.
5. To place ads on the left side of your post after the post title: To do this, first wrap the AdSense code inside “div style=float:left” . Next, search for “div class=’post-header-line-1?. Place the AdSense code immediately below the ‘”post-header-line-1? div tag.
6. To place ads on the right side of your post after the post title: To do this, first wrap the AdSense code inside “div style=’float:right;”. Next, search for “div class=’post-header-line-1?. Place the AdSense code immediately below the “post-header-line-1? div tag
If you are expecting good amount of traffic to your blog, then you can harness that traffic to generate revenue by placing ads that would be beneficial for the blog visitors. If you are a novice, then learning how to place ads at different locations inside a blog is certainly going to benefit you in the end.


Adsache review

Adsache is an online CPC advertising network. The revenue model of this ad network is CPC. According to them they are generating more than 1 billion ad impressions per month. It accepts all languages worldwide. Sometimes users may experience CPM, CPA and CPV campaigns along with CPC.

Adsache review sites prior to approval.


Image Credit : Adsache
Requirements to join Adsache CPC advertising network

The sites must not host any illegitimate content like hacking, spam etc.
The sites must not violate copyright laws.
The sites must not have made for advertising.
Sites having thin content get disallowed.
Publishers must not later the ad code.
Publishers must not click on their own ads. Encouraging others to do is an equal crime.
Publishers must not use bots or traffic exchanges to generate fake traffic.
Excessive usage of ads leads to termination.

Publishers found guilty will eventually lose their earnings as well as accounts.
Ad formats

Publishers have a wide range of formats like banner, slider, layer, pop-up and pop-under. Site owners can use only 2 ad units per page. However you should not use 2 sizes of the same format on the single page. For instance publishers can’t use 160×600 and 300×250 sizes. You have to combine banner and layer formats for best results.

Publishers get paid on Net 30 basis.

The threshold payout for different options are as follows :

PayPal -$10
Payza -$10
Payoneer -$20
Wire transfer -$1000


Publishers worldwide can join this network.
100% fill rate
Competitive rates
Multiple ad formats
Geo targeted ads
Low minimum payout
Real-time reporting system


They don’t count impressions. If you generate 10,000 impressions with ‘0’ clicks then you won’t get a single penny out of it.
Banned accounts won’t get activated at any cost.

Final Conclusion :

The earnings depend on the niche, location of the visitors and clicks. Publishers have to place ads near the content to gain more engagement. Hope this Adsache review help publishers to get started.

Join this CPC ad network and start making money
The following two tabs change content below.

Sunday, 13 November 2016


Out-of-favour Manchester United winger Memphis Depay came off the bench to score twice and save the Netherlands’ blushes in Luxembourg in World Cup qualifying on Sunday. On an evening when Europe’s minnows came close — but ultimately fell short — of springing some major upsets, Depay gave United manager Jose Mourinho a reminder of his worth just as the Dutch were sliding to an embarrassing draw. The 3-1 victory over Luxembourg keeps the misfiring Dutch in the hunt for a place at Russia 2018, but they will need to play an awful lot better if they are to trump the twin threats of table-toppers France and Sweden in Group A. Arjen Robben had a chance after a quarter of an hour for the Dutch, but should have done better than firing at Ralph Schon in the Luxembourg goal, as the Dutch tightened the screw. Davy Klaassen then went closer, teed up by Robben, but Schon came to the rescue again for Luxembourg, bottom in the group. Memphis Depay of the Netherlands and Javier Aquino of Mexico compete for the ball during the 2014 FIFA World Cup Brazil Round of 16 match between Netherlands and Mexico at Estadio Castelao on June 29, 2014 in Fortaleza, Brazil.

netherlands vs mexico
The home stopper was finally beaten on 36 minutes when Robben moved the ball onto his favourite left foot to slot home for a deserved Dutch lead. But a minute before the break the minnows grabbed a leveller after Joshua Brenet felled Daniel da Mota in the box and Maxime Chanot punished the visitors from the penalty spot. Robben, whose brilliant career has been blighted by injury, failed to make it out for the second half. Wesley Sneijder was also hooked at the break. It was Depay, one of the replacements, who struck soon afterwards to break home hearts. And the 22-year-old, strongly linked with a move away from Old Trafford to Everton, sealed the match with his second goal in the final minutes. Also in Group A Bulgaria edged Belarus 1-0 in Sofia. In Group H Gibraltar made a piece of history and were level for a while in Cyprus before going down agonisingly 3-1. But they had cause to celebrate a significant consolation with Lee Casciaro’s 51st-minute equaliser — their first ever World Cup qualifier away goal. In Group B the Faroe Islands were similarly plucky in soggy Lucerne, where Switzerland scored seven minutes from the end through Stephan Lichtsteiner to grind out a 2-0 victory and maintain their 100 percent record. In the same group Hungary hammered Andorra 4-0 at home. Switzerland are streaking away at the top of the group with 12 points from 12, but European champions Portugal can close the gap to three points again if they beat Latvia at home later on Sunday.

Microsoft, Gr8jobsng.Com to provide employment for Nigerian youth

The software giant, Microsoft, in collaboration with Africa’s Number one recruitment platform,,  recently organised a recruitment day programme to empower Nigerian youth with job opportunities in Lagos.
Meanwhile, a statistics released by the National Bureau of Statistics earlier this year placed the unemployment rate of Nigeria at 10.4 per cent.
The event with the theme: “Learn and be hired!” was aimed at creating an opportunity for potential job seekers to meet with career experts and recruiters to understand the job market, be positioned and take advantage of available jobs.
Current statistics has revealed that 50% of youths between the 18 and 35 years are either unemployed or underemployed.
Graduates at the event held at Microsoft Office in Lagos had the opportunity to learn about important career related subjects like CV writing, Career Planning, Interviewing etc.

Saturday, 5 November 2016


How To Hack and Bypass Windows Login

Have you forgot your Win XP, Vista, 7, 8 or 8.1 logon password ? Do you want to access your friend’s or relative’s computer 😉

In this guide, we will show you how to bypass a Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1 and Windows 10 logon password

We’ll use a Tool named Kon-Boot….It is paid software but allmost all softwares are crackable ans so is for Kon-Boot 😉 Cracked Software Link given below 🙂

Features of Kon-Boot

It Can Bypass Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1 and Windows 10
Kon-Boot is now able to bypass online account authorization on Windows 8/8.1
It will not overwrite your old password …it means that you can easily access you Friend’s or relative’s PC without getting caught :p
Fast, tiny and gets your job done !

What’s New ?

Windows 10 Supported (Offline only)

Steps To Bypass Windows Log-on using Pen-Drive

Download and Extract Kon-Boot 2.4.rar from the links given below
Plug in your Pen-Drive (Remove all other Pen-Drives)
Right click on “usb_install_RUNASADMIN.bat” located in kon-bootUSB folder and pick “Run As Administrator” option.
After Process Compeletion, Reboot
Choose Boot from USB from BIOS settings
Follow the installation procedure.
After Booting process you can login without password, just press “Enter”
Just Remove Kon-Boot PenDrive and Reboot to Get back the original Windows authentication functionality.

Steps To Bypass Windows Log-on using CD

Download and Extract Kon-Boot 2.4.rar from the links given below
Insert Empty CD in your Optical Disk Drive
Download and Install ImgBurn From the Links Given Below
Run ImgBurn program
Select “Write image file to disc”
Click “Browse”
Select “kon-bootCD.iso” – this file is located in your “kon-bootCD” directory.
You are ready to use your Kon-Boot
Choose Boot from CD from BIOS settings
Follow the installation procedure.
After Booting process you can login without password, just press “Enter”
Just Remove Kon-Boot CD and Reboot to Get back the original Windows authentication functionality.

How To Change Profile Password?

Boot with Kon-Boot
Navigate the Start Menu to Control Panel
Select “User Accounts and Family Safety”
(if the User Account Control window appears) Click “Yes” and leave the password field empty
Select “Create a new account”
Create the account (pick a name) and set the permissions (administrator).
Disconnect Kon Boot and restart the computer to restore original Windows authentication functionality.
After Restart, Select your new User Account (the account you have created)
Navigate the Start Menu to Control Panel
Select “User Accounts and Family Safety”
Select the target User Account (the one you want to change)
Select “Change the password”
Input the new information for the account and click “Change password”
You are done 🙂


Friday, 4 November 2016


Hello blogger!
One of the first steps a good blogger must take to increase seo rankings or make users escape the small task of cramming or sharing a blog's long url is getting a custom domain name.

Would you like to rename your google blog url from "" (Google's free subdomain) to something cooler or shorter,or something that defines your blog niche to attract readers or you are just bored of the long url that's giving other blogs with custom domains whether free or paid an edge over yours? Ok now to top it dont have enough cash yet to buy paid domains like .com .ng .net .xyz etc
Then this short precise tutorial should guide you or first time bloggers on how to quickly and effectively park a free .tk .cf .ga .ml .gq domain easily on blogger.

Get a free .tk .ml .ga .gq .cf domain name today from with these easy steps

Step 1


Enter your blog name (the url you want for your new domain name eg Inform8t which makes it domain) in the text box you see and click check to see if its available or used by another person,if its available,move to step 2 if not keep changing until you get a name no one has used

Step 2

Freenom will now take you to a page that displays a list of free domains for you to choose,i choosed the .ml (which is also the example im using in this tutorial) you can select any one as they are all free.
Wait for the page to load.

Step 3

  • You should see your selected domain and your blog name eg blogname inform8 and selected domain .ml Select forward this domain to url and input your former blog url in full eg

  • Select 12 months (your new domain would last free maximum of 12 months)

  • You will be asked to submit your email for verification and registration later, enter a valid email and submit

    You should get a "thank you for placing an order" alongside your order number,dont worry this order is free and you should see a client area button.

    Step 4

    Login to your mail account and Verify your freenom account through their message,complete the short registeration,(if dont know your state code in Nigeria,
    input 900231,thats Abuja POSTAL ZIP CODE)
    Step 5

    Now were getting somewhere

  • Goto your blogger account,click setting > publishing > setup a third party url for your blog

  • Input your new registered freenom domain like this www.yoursitename.newcustomdomain eg and submit
    You should get an error,dont worry that's what we need,its not actually an error,it's Google's way of sending unique dns names server for you to park a custom domain

    You should find something like this(should not be exactly what we have below here,this just an example)

    1st paragraph

    www |

    2nd paragraph
    GHSghyxxs | gh.ggryg.gdf6yy.yssa

  • Write these down exactly if you re using an ancient browser or open a new tab if you are on smartphone or pc

  • Go back to freenom website,login your account if you have to; to access your domain dashboard.

    Step 6

  • Select My Domains > Manage Domains > Management tools > Name servers > Select default Name servers > click Change name servers.

  • Goto Manage Freenom Dnsto activate your domain finally on freenom

  • You should find a Add Record

    Step 7

  • You should find upto four input boxes with title Name,Type,TTL,Target respectively in three places (this order of arrangement is important if you are surfing on mobile) eg [1st set] Name,Type,TTL,Target
    [2nd set] Name,Type,TTL,Target
    [3rd set] Name,Type,TTL,Target
    if you dont find upto 3 set,select add button under

  • In 1st set of input boxes,In Name Leave the input box under it empty

  • In Typeselect A

  • In TTL input 14440 or skip it if its already there

  • In Target input

  • In 2nd set of input boxes,In Name fill in the 2nd paragraph text you got from earlier Google blog error (Step 5) eg GHSghyxxs

  • In Typeselect CNAME

  • In TTL input 14440 or skip it if its already there

  • In Target input the gh.ggryg.gdf6yy.... text example

  • In 3rd set of input boxes,In Name input WWW

  • In Typeselect CNAME

  • In TTL input 14440 or skip it if its already there

  • In Target input text example from 2nd paragraph of step 5

    Click submit,you should get a "record added sucessfully message"

    Step 8

  • Finally go back to your blogger dashboard,refresh and wait for some minutes, Repeat step 5 this time without adding the wwweg input only, it will save without any error and that means your domain has been parked successfully!

  • Refresh and goto settings again > domain settings >click redirect to yoursitename.newdomain eg
    without www and save!

    DONE!! wait for some minutes and visit your new url!

    If you encountered any problems setting up your own domain,comment here and lets solve it or if you like the tutorial and find it usefull,share with others and post your new blog url here in comments!

  • Translate

    Subscribe now